Fantastic A Worker Fix The Guide Rail Into The Designated Position. The block that goes into the bottom slot of the rail (plus forming the plastic parts in a way so the block can't rotate rotate out of alignment or come to close to the. Mounting a switch into a cabinet after purchasing an s7900e ethernet switch, you can mount the switch into an h3c n68 before installation, ensure that:
You can find the worker log file and copy it to a temporary area so that you can review it. As a result, the length of cut is determined simply by the length the rear stops on the parallel guides can be set to position the zero clearance cutting edge of the guide rail from 190 to 650mm off the back edge of. When placing the bolts into the mounting holes of the lm rail, check if the bolt holes are displaced.
Mounting a switch into a cabinet after purchasing an s7900e ethernet switch, you can mount the switch into an h3c n68 before installation, ensure that:
In addition, the guide rail can be positioned at any angle to the table. Place a guide rail horizontally in the planned position, and keep the guide rail in close contact with mounting bars. Rumour has it, he knows how to fix. Guide rails should be moved into elevator wells with maximum care and should be lifted with cranes or similar equipment as much as possible.