Handrails must run the entire length of the stair bottom nose to top. Follow the five easy steps below to obtain the measurements necessary for your handrail system.
If no codes regulate stair handrail height in your area you have the freedom to install the rails at a different height but as suggested 36 to 40 inches is the best for preventing falls.
How high is a railing on stairs. The standard railing height requirement was set March 15 1991. California and a handful of other states mandate a 42 minimum deck railing height. This Old House general contractor Tom Silva installs a wall-mounted staircase banister.
Codes require railings against a wall to be between 30 inches and 38 inches high while handrails on open stairs must be 34 to 38 inches high. The minimum deck railing height allowed is 36 inches in most states and provinces. A standard stair railing is between 30 to 34 inches above the edge of each riser.
Stair Rails are also required on any staircase with a drop of more than 600mm. The building code dictates that the handrail height should be between 34 and 38 inches. Provide a handrail on one or both sides.
5 Easy Steps For Measuring. Install stair handrails at the height suggested by national and state building codes which is 30 to 34 inches. A railing must be continuous from the bottom of the steps to the top and begin.
Staircases require at least one handrail. If you are working with alternating tread devices or ship ladders you must measure above the tread nosings. The top rail must be at least 42 inches in height 191029f1iiB and the handrail must be 30 to 38 inches in height 191029f1i as measured at the leading edge of the stair tread to the top surface of the rail.
There is one date you need to remember. Ad Find China Manufacturers Of Wrought Iron Stairs. You should fit a handrail at a height between 900mm and 1000mm from the pitch line of the stairs or the floor for landings.
For stair rail systems installed on or after January 17 2017 the top rail and handrail must be separate. Ad Find China Manufacturers Of Wrought Iron Stairs. There are a number of guidelines outlined in Part K of the Building Regulations which set out the handrail requirements for staircases.
In general the railing for exterior stairs should be around 36 inches high. Although your stairs might have a width that falls between 44 and 88 inches you might want to adopt the use of a handrail on each closed side and a standard railing on each of the open side. If the stairs are less than 1m wide.
Railing height is measured from the top of the deck surface to the top of the deck rail. The overall height is the distance from the floor or landing at the top of the set of stairs to the floorlanding at the bottom of the set of stairs. This is approximately 35439 inches.
The British Stair Regulations states that the height of the staircase cannot be higher than 1000mm from the stairs and installers should aim for a distance between 900mm and 1000mm. The height is calculated in relation to the stairs and is measured from the very end of the stair tread in a completely vertical line. Step 2 Measure the overall.
Step 1 Measure the overall height. Handrails should be no more than 38 inches above the stair or ramp. The rail should be between 30 and 34 inches above the tread nosings.
Handrails should be no less than 34 inches above the stair or ramp. If your current stair railing was installed prior to that date you will probably or should have a hand railing of between 36 and 37 inches from highest surface of the stair treads. See below for a shopping list and toolsSUBSCRIBE to This Old House.
How do you measure a stair railing. The railing height code distance or the height from the top of the bottom stair to the rail is 34 to 38 inches.