Lag bolts and washers for each post holder each one normally has four holes Attach a Wooden Railing to a Concrete Porch. This will make all the difference.
Using a wrench key to drive screws Use 1 12 lag screws to secure the post into position.
How to attach wood railing to concrete steps. These kits make it extremely easy to add a railing to already existing structures like a concrete wall or steps. Hammer on End Caps. This will get you more bearing surface between the posts and the steps and allow for more anchors in the masonry spaced further apart.
Attach Anchors to Concrete – Once the holes have been drilled and all debris removed fit anchors into the holes and use a hammer to drive them in. Attaching a wooden railing to a concrete porch adds a touch of elegance. Similarly one may ask how do you attach a railing to concrete steps.
This would set snug to the stairs. Use a hammer-drill and a masonry bit to drill two 12-inch holes through the kick-plate into the concrete to insert 12-inch metal-sleeve anchors. Now you can attach the railing to the bracket using self drilling screws.
The reason for using a sledgehammer instead of even a regular heavy-duty hammer is because the concrete nails are most often made from steel. They look fantastic too. Make sure the post holders are completely secure and are not prone to wobbling.
Build a truss type post a 90 degree right triangle and anchor the base with though bolts to blocking under the floor. Use a socket wrench to screw on the post holders to the concrete steps. Place the bolt on top of the post-holder screw hole and then put a washer between the holder and the bolt.
You may also want to add a second washer between the post holder and the concrete step. I would attach the posts directly to the sides of the steps with the posts extending down as far as possible. Epoxy glue is another effective method for attaching wood to a wall ideal for attaching shiplap and other decorative paneling.
Attach Handrail to Bracket. Use a thin drill bit otherwise the lag. Line up the bracket with the holes you just drilled and use concrete screws to attach it to the concrete wall.
Attach Flange to Anchor Bolts – Place the flange on the bolts and hand tighten the bolts onto the flange. Attaching the Railing to a Concrete Base. To attach your railing to concrete you will need a hammer drill to drill into the concrete a standard drill for drilling into the pipe an Allen wrench to tighten the fittings a hammer a tape measure hack saw vacuum extension cord and a sharpie marker.
Attach a standard grip rail with standoff brackets to either type of post arragement. Attach Railing to the Flange Base – Once the flange is mounted. The first step is to ensure that the wood and the wall are both bone dry as you want to create maximum adhesion when sticking wood to concrete.
Finally with everything attached the only thing left to do is hammer on the end caps. Drill the holes deep enough into the concrete so that the tops of the sleeves will be flush with the surface. To show you just how simple these railings are to use heres 15 customers who have used our railing solutions to help them conquer their concrete walls or steps.
How to attach wood posts railing to concrete with Simpson Strong Tie E-Z Base – YouTube. Mark Kranenburg walks you through how to construct a simple wood deck rail on a deck and down a set of stairs. Use the core drill method.
Tighten Bolts – Use a wrench to finish tightening the nuts onto the bolts and then use a hacksaw to trim off any anchor bolt that is left sticking up above the nut. Consequently the last step when anchoring a post to concrete is to drill pilot holes with a drill machinery through the holes in the post anchor. When using this method to attach wood to concrete you should do your best to hit the nail straight down and not at any angles.
Tapcon screws work great for this.