When installing the rack rails be sure they are oriented Front Left and Front Right as indicated on the rails. To avoid risk of personal injury or damage to the.
Installation sequence and checklist Step Description Completed 1 Perform site preparation.
Hp quick deploy rail system installation instructions. Connect the power cord to the power supply. Always install the heaviest item first and continue to populate the rack from the bottom to top. For more information see the installation instructions that ship with the 2U Quick Deploy Rail System.
3 Connect cables to the server. 11 QuantityTool A 4 Slotted T-25 B 4 Y Not shown. If the rails are locked disengage them by pressing the green lever found on the side of the outer rail.
-Tool-less access to all system components for easy in rack serviceability. Connect cabling and power cords Connect iLO management cabling. Push the workstation to slide it completely into the rack.
Connect the power cord to the power supply. Attach the Front and Rear of the rails to the 4Post rack as shown below using supplied 8-32 Pan Head Screws on each side. Required to lift the server during installation or removal.
Attach the rails to the rack. Quick Deploy Rail System Installation Instructions 1U Ball Bearing 1 2 Quic k Deplo y R ail S y stem Installati on Instr ucti ons Har dw ar e kit contents WARNING. HP recommends that stabilizer option kits be used when one or more of Item Hardware Scale.
Connect LAN core IO cable. If installing more than one chassis install the first chassis in the bottom of the rack and then install additional chassis by moving up the rack with each subsequent chassis. Repeat for the other side.
If you chose not to install the cable management arm install. Up to seven chassis can be installed in a 36U 1200-mm 4724-in deep rack. Determine the spacing for the rack components.
Install the server and cable management arm into the rack. Leave the front and rear Pan Head Screws on the left side rail slightly loose. Round-hole racks Square-hole racks Threaded-hole racks No tools required No tools required Installing the rail kit into a rack IMPORTANT.
When installing the rack rails be sure they are oriented Front Left and Front Right as indicated on the rails. Install the server and cable management arm. Connect the AC input power cable.
2 Install the server into a rack or pedestal. -Quick Deploy Rail System includes sliding universal rails an ambidextrous cable management arm and quick release levers for fast and easy serviceability. Refer to the installation instructions that ship with the 2U Quick Deploy Rail System.
Tighten the front and rear Pan Head Screws on the right side rail. Two people are necessary to properly align and install the workstation and rails. Install the server and cable management arm into the rack.
Quick Deploy Rail System Installation Instructions WARNING. Quick Deploy Rail System Kit. Connect iLO management cabling.
To reduce the risk of personal injury or damage to the equipment at least two people are required to lift t he server durin g installa tion or removal. Right side shown Left side parts are labeled L. For more information see the installation instructions that ship with the Quick Deploy Rail System.
HPE ML350 Gen9 Unboxing Rail kit Installation Rack Mount Bangla.